Reconditioning Process 

Each reconditioned machine we sell goes through the same detailed process shown in the above photos. We strip the machines down to the frame for deep cleaning and inspection. In order to assure the absolute highest image quality and registration, we start by replacing a long list of mandatory new parts for every machine. Then, according to the condition of each machine, we also replace additional items on an as-needed basis. For anyone looking to buy a reconditioned machine, we urge you to ask for a parts list like ours. Don't be fooled by others who simply clean-up a machine and call it reconditioned. 

Based on our experience, this is the only way to assure the absolute best performance of a reconditioned machine, and our procedure is consistent with Xerox guidelines for equipment reconditioning. Do not underestimate the importance of changing small items such as clutches, which are vitally important for providing the best registration accuracy possible. Due to our attention to detail and high-quality assurance, our machines are especially well suited to demanding applications such as graphics arts and graphics design.

After completely stripping, cleaning and rebuilding each machine, our technicians spend, on average, an additional four hours per machine for final testing and calibrations. We fully test the Fiery, the print quality, the paper trays and copy functions. We calibrate the colors, the registration and the fuser unit. The bottom line is that our machines are delivered completely customer ready.
 

Call Active Printing Technologies, Inc. today!
Toll-free: 1-877-572-6868 or  (954) 523-6868  

Just 30 miles from Miami, FL - USA